Process of Floor Maintenance Essay -- Process Essays

PREFACE Floor maintenance is a vital activity in any building which has tile flooring, whether it be a hospital, university or office building. Floors can either reflect a positive or negative image of an institution, depending on how they appear. This paper discusses the proper procedures for the three main steps in floor maintenance: stripping the floor, applying the finish and maintaining the finish. Everyone that is associated with the field of janitorial supplies and maintenance should have at least a general understanding of the correct procedures in floor care. Examples of such people would include janitorial workers, supervisors, and suppliers. The more informed everybody involved in the process is, the more efficient it becomes. Consequently, time and money will be saved. ii INTRODUCTION First impressions may play a role in whether a company gets a government contract or wins a bid. For an individual, it may determine if he/she gets a raise, promotion or even a second date! There is no doubt that making a good first impression is very important. Therefore, for a company, hospital or university, the way its floors look is highly important. Floor maintenance may be thought of as sinkhole of money to some, but to others, it is an investment in the future of the organization. A beautiful plant or building with bright shiny floors can be an advertisement reflecting that company's pride and commitment to excellence. A building that has dull dirty floors may reflect a lack of attention to detail or that the company is second rate. THis paper will discuss the three main steps in the floor maintenance process: stripping the floor, applying ... ...more uniform throughout. The liquid is emulsified so that the different components do not separate. plasticizer: a factory finish on new tile that must be removed in order for the floor finish to adhere. sealer: an undercoating that is applied before waxing to fill in the tile's pores so the finish does not soak into the tile. stripping: the fist process in floor maintenance. This is the process by which all the finish is removed from the tile using a stripping solution, mop and/or floor machine. 12 WORKS CITED Dixon, M. February 1988. Resilient floor care: Presenting a high quality image. Maintenance Supplies. 36-40, 58, 62. R******, Edward, janitorial sales man for 27 years. Personal interview. Techniques of Floor Maintenance. 1988. Baltimore: Grow Professional Products.

Christian Gospel Essay

What are some ways the Christian gospel is perceived in our Culture The Gospel of Christian is alleged in our traditions in many customs. Most people have the perception that if you are a Christian you feel you are holier than a non-believer. What they do not understand is that, when anyone makes the choice to become a Christian, they make life-long changes in their lives. On several occasions, friends and sometimes family become offended with the choices you make in becoming a Christian. In my life, my wife and I made the decision to become a Christians, we changed everything in our life, including the way we think. What are some specific moral, emotional, and intellectual reasons people may reject the Christian Gospel The main reasons individuals refuse the gospel is mainly due to their morals. Usually it is beliefs, marital status or political. Christianity weights a devotion to positive ethical regulations that several individuals think is old-fashioned, or prejudiced. People view Christians as being hypercritical and unenthusiastic to earn the right to be heard because of their attitudes. People who live a diverse lifestyle other than the Christian Gospel, we are not willing to dialog with someone. Christian Gospel is viewed as conflicting to intellectual learning. The majority of the bible is viewed as a leprechaun or myths, and several human beings are reluctant to obtain a firm glance at the worldly, for Christ’s life, fatality and renaissance. The Christian Gospel can be tough to grab a hold of, particularly for non-believers who really do not understand God’s love for his children. The fact that human beings do not understand that there is somebody that loves them unconditionally. Nevertheless, when people begin to understand and have a relationship with God, they start to give him their all and just dive in. What can Christians do to address these objections and better communicate the Christian gospel? To be honest, Christians should reserve themselves from the noisily hypercritical, the fakes. Our actions should always speak louder than words. People should see in Christians, the Jesus in them. By caring for those individuals who are still living in sin, like Jesus did, we get the right to heard. Just accusing people, and performing or behaving ungodly, in which you are acting no different from the non-believers, will not conquer the objections of the humankind.

Human Resources Code of Ethics Essay

Message I am thrilled to join Company X’s management team. My colleagues have been stellar in providing me support and helping me accilmate to the organizational culture, which is different from what I am accustomed to. I have encountered my first challenge, a challenge that is incumbent that I bring to your attention along with three detailed solutions, inclusive of attractive and detractive aspects of each. It is also important that I share with you the methodology I employed to arrive at these conclusions, since it is reasonable for you to have access to and test the methodology employed to engender these solutions. I will also recommend to you an appropriate course of action. Separately, I will present a report, which will report the findings of an analysis that I conducted on our company’s ethical decision-making process. This report will include strategies to mitigate against concerns I will have raised in the memorandum. I will also discuss the process of creating a code of ethics that will provide for employee growth through ethical decision making and continued company revenue growth. Production Concern Company X is the leader in the production of toy whistles for children the world over. Our principal production plant is located within the United States and, naturally, is under the purview of production guidelines set forth by the U.S. government. The quality-assurance department recently informed me of a production issue that has arisen. Toy whistles that have been manufactured and are on schedule for shipment undergo an arduous testing process to ensure that the  constitution of each toy meets federal regulations. Toy whistles that will be shipped to South American countries have, unfortunately, failed lead-level requirements; they are slightly higher in lead than what is legally tolerable. Our company has decisions to make about how we address this considerable concern. After analysis, collaboration with team members, and sufficient reflection, I have developed three solutions to address this concern. Each solution has attractive and detractive aspects, both of which I will discuss. Ethical, legal, and financial considerations must be made with all solutions. Solution 1: Cease shipment; Re-produce Toy Whistles At current lead levels, the toy whistle would not be shipped to customers. The entire production process would re-apply, which includes re-securing the raw materials necessary to make replacement whistles, re-producing those whistles through the production process, and commissioning the quality-assurance department to verify that the whistles meet all federal guidelines for selling and consumption. It will also be important that the quality-assurance department provide a quality verification of its own processes. Such a verification will be necessary, since antecedent quality processes failed to identify the higher-than-normal lead levels of our toy whistles. Solution 1: Explanation of Method Used to Select Solution A combination of brainstorming and SWOT analysis were employed to determine three solutions for our company’s quandary. The brainstorming process involved three team members who reviewed the situation and offered ideas—any ideas—as solutions. Each team member produced two ideas, totaling six possible solutions. The following is a breakdown of submissions by team members: Bob Jones| Celine Jiles| Patti Durant| Stop Production; Adjust Lead Levels| Continue Production; Bribe Foreign and  Domestic Government| Stop Production; Offer Different Product| Stop Production; Make Plastic Whistles| Continue Production; Ignore Lead Levels| Stop Production; Close Business| A SWOT analysis was performed on each decision alternative to test its integrity. SWOT is an acronym for â€Å"Strengths,† â€Å"Weaknesses,† â€Å"Opportunities,† and â€Å"Threats† (Bradford, Duncan, & Tarcy, 2000). The goal is to reduce the possible responses to those that require attention. Bob Jones Solution A Strengths: Legal and ethical approach to doing business. Promotes high levels of customer service. Holds all parties accountable for their actions due to process review and refinement. Weaknesses: Delayed production. Poor customer-satisfaction surveys in the short term. Costly to hold up production. Opportunities: Favorable contract renegotiation if determined process failure with supplier. Possible acquisition of new customers if mitigative steps made known. Threats: Possible government intervention if lead levels are exposed. Possible customer revolt if mitigative steps to lead levels not perceived correctly. Customer churn—possibly to competitor—due to production delay. Board of directors overhaul of C-level management Based on these considerations, Solution A is a viable candidate for resolution. Bob Jones Solution B Strengths: No delay in production. Customer satisfaction not harmed. Foreign government receptive to bribes. No disruption to revenue. Weaknesses: Domestic government not receptive to bribing. Massive costs due to bribing. No consideration for customer health. Short-term solution. Socially irresponsible course of action. Opportunities: Short-term customer growth. Relationship-building with foreign government. Threats: Considerable legal actions from both domestic and foreign government if not receptive bribes. Possible legal threats from customers. The costs associated with Solution A indicate that it is not a viable solution. Celine Jiles Solution A Strengths: Legal and ethical approach to doing business. Promotes high levels of customer service due to considering customers’ health. Holds all parties accountable for their actions due to process review and refinement. Weaknesses: Massive delays in production. Abrogation of contract with current supplier. Extensive training costs for new products. Extensive project-management costs to deploy new product. Substantial increase in customer churn due to offering different product. Possible negative press in foreign market. Possible domestic layoffs due to change in product. Opportunities: New streams of revenue due to new product. New streams of customers due to new-product demand. New, lower cost contracts with new suppliers. Possible employment of foreign workers to replace costly domestic workers. Threats: Legal threats from current employees subject layoff. Possible customer revolt if competitor unable to make up for our departure from whistle market. Increased regulatory scrutiny possible based on new product. Intractable board of directors. Based on these considerations, Solution A is a viable candidate for resolution. Celine Jiles Solution B Strengths: Minimal delay in production. Avoid lead-level requirements. Safter products for customers, thereby increasing customer satisfaction. Avoid legal issues from foreign and domestic governments. Contract abrogation with supplier if process failure due to supplier. Socially responsible course of action. Weaknesses: Contract abrogation with existing supplier if Company X process failure. Short-term customer dissatisfaction due to minimal production delay. Training for production of new whistles. Costly process refinements. Opportunities: Possible acquisition of new customers. Long-term customer growth. Possibly reduced prices with contract negotiations for new suppliers. If process adjustments made public, possible acquisition of customers in other countries. Threats: Minimal threat of legal action from domestic or foreign governments due to initlal lead-level failures. Minimal threat of substantial customer churn. The strengths of Solution B indicate that is viable enough to be considered. Patti Durant Solution A Strengths: Reduced production costs. Short-term customer satisfaction due to on-time delivery. Possible increased customer acquisition. Weaknesses: Very short-term solution. Disregard for long-term customer health. Disregard for domestic legal mandates. Socially irreponsible course of action. Long-term profit loss. High customer churn in long term. Opportunities: Short-term increase in streams of revenue. Threats: Extensive legal threats from public and private sector. Abrogation of current contracts iminent. Long-term erosion of shareholder confidence. Solution A should not be further considered due to the blantant disregard for customer safety. Patti Durant Solution B Strengths: Regard for customer health. Weaknesses: Total loss of all revenue and profit. Opportunities: No known opportunities. Threats: Possible legal action from suppliers, employees, customers, and governments due to abrogation of contracts, inability to pay out on employee pensions, or willfully missed customer demand. Solution B is unquestionably not worthy of further consideration. Solution 1: Advantages and Disadvantages The important advantage this solution offers is that our toy whistles’ lead levels will not detrimentally influence the health of our customers. Our identification of this issue will allow our company to take mitigative actions before the whistles are in the hands of our consumers. Another advantage of this solution is that our customers will be unaware that there could have been an issue with the whistles. Our consumers’ ignorance allows our company to avoid a public-relations concern or public excoriation of our product and company brand. There are no government mandates that our company must disclose these sorts of issues if they are discovered before being delivered to our customers. An important disadvantage to this solution is that the investigative process and resultant process refinements will prove costly and timely. It is evident that a production and service failure has occurred, since our whistles’ lead levels currently contravene United States legislative mandates; however, we are not certain where in the supply chain this failure has occurred. Unnecessary people-power must be devoted to resolving this issue sufficiently to prevent issues in the similitude of this one. Another disadvantage to this solution is the effect it will have on employee morale. To be specific, the judgment of the managers of these processes is dubious and will have to be investigated. It is unquestionable that coaching and development, inclusive of corrective action, will have to be meted to all parties involved in this situation. And because of the cost of resolving this matter, some managers and their employees may have to have their employment terminated. No matter how delicately the corrective action will be handled, other employees will inevitable respond negatively. This situation may encourage discussions of unionization. It may engender unnecessary employee churn. Or for those who have their employment terminated as a result of our investigation, it may very well involve contending against ex-employee litigation for perceived wrongful termination, which will involve government agencies and their investigations. Solution 1: Ethical Considerations This solution is an ethically viable option. The reason is that the lead levels prescribed by the federal government are ostensibly predicated on customer saftey and, if more stringent, supersede lead-level requirements of the target country. Providing customers, especially young children, with high-lead toys is immediately unethical and demonstrates a disconnection from social responsibility. Solution 1: Financial Considerations This solution, however, is the most costly and will make profit from these sales impossible unless we increase the price of the toy whistles. The  following are cost considerations of this solution: 1. Vetting Raw-Material Supplier: It is possible that the raw materials that we obtain from our supplier do not possess the integrity that we expect, which would cause products to fail quality verfifcations. An audit would be required of the supplier. This audit would entail the following costs: a. On-site inspections: $10,000, inclusive of labor costs and travel expenditures b. Report of findings: $5,000, inclusive of labor costs of presenting the findings c. Negative findings: $10,000, inclusive of replacing and contracting with a different raw-materials supplier. d. Positive findings: $15,000, inclusive of sunk costs of on-site inspections and reporting of findings (since no issue would have been with the supplier) 2. Vetting Production Processes: There may be deficiencies in the production process that cause higher levels of lead to result in our products. Here are the costs associated with this vetting: e. Departmental inspections: $7,000, inclusive of labor costs f. Report of findings: $5,000, inclusive of labor costs of presenting the findings g. Negative findings: $50,000, inclusive of making process adjustments, training on new processes, and follow-up labor costs h. Positive findings: $12,000, inclusive of sunk costs of inspections and reporting of findings. As easily noted, the costs of making process changes are considerable. However, the costs of these changes should not, by themselves, be an impetus to continue to produce high-lead toy whistles.

Factors Affecting Program Selection of Selected Polytechnic University of the Philippines

It is well acknowledge that education environment is an important element in determining students' ability to reach their fullest quality (dealing Jar. Et al. , 2006). Education is a medium of shaping students' ability and behavior. It is a process wherein one can achieve social competence. And also, it is through education that different knowledge can be transported and disseminated to everyone. Educational institutions also play an important tool in developing the students as they mold their mind and intellect.One of the famous and competitive educational institutions in the Philippines is the Polytechnic University of the Philippines (PUP). It is a public, non – sectarian and non – profit institution of higher learning which aids to strengthen the students' potentials. In today's environment, students select programs based on the quality of placement they are likely to get after the completion of their studies. In the case of the students of Polytechnic University of the Philippines (PUP), the students aspire to Join those programs which ensure for a gainful employment.There are programs which are dominating from the other programs. It is due to the fact that some programs doesn't remises good placement for the students. Students formulate decisions throughout their college career, and decision- making is an important building block in the learning process. F. Yates, Venison, & Petulant (2003), defined decision as â€Å"a commitment to a course of action that is intended to produce a satisfying state of affairs. † Decision – making is essential because it makes things possible to take up the most excellent course of accomplishment in carrying out a given assignment.When there are different ways of performing a task, it becomes necessary to discover the greatest way and that is what decision-making is all about. The course of action finally selected would produce the best outcome. The program selection decisions of students are amo ng the most significant in the success of their education. It is vital to select carefully a program in order to fully accomplish their goals in life and to have a better and good quality future. Program selection is necessary for the reason that it helps us decides what our own lives what to be like.Particularly, the researchers aim to determine the factors affecting program selection of the Polytechnic University of the Philippines (PUP) students at Star. Mesa, Manila. Statement of the Problem The main purpose of this study is to determine the factors affecting program selection of the Polytechnic University of the Philippines (PUP) students. Specifically, the study aims to answer the following research questions: 1 . What are the respondents' profile as to age, gender, socio economic status and program? 2. What are the factors affecting program selection of the respondents? 3.Is there a relationship between the respondents' profile and their selection of programs? 4. What are the possible recommendations that can aid future college students in selecting their programs? Significance of the Study Through this study, future college freshmen students will have insights on the factors affecting present college students on how they select their degree programs and this will also serve as a guide in choosing their own programs wisely as they go on to college. This study will also provide some insights to present college students if in case they want to shift programs.This study will also profit the parents so that they will realize how important they are as a source of encouragement in which children are free to explore different areas of program selection. This study will look forward in giving their children n assurance to acquire quality education that would enable them to obtain better job, better income, and brighter future. This can also benefit guidance counselors from the different public and private high schools so that they can discuss the factors affect ing program selection of college students to current fourth year high school students and to guide them to choose their own programs carefully.The findings will serve as a guide to different universities and colleges so that they will know the most preferred programs of the students. This will also contribute to the government, most especially the Commission on Higher Education, for them to fully understand the state of the students of today, and for them to give appropriate action. This will also be helpful to future researchers so that they will have a guide and a reference for future study. This will also make them aware of the factors affecting college students' program selection.Scope and Delimitation of the Study This study deals on the factors affecting program selection of the Polytechnic University of the Philippines (PUP) students located at Star. Mesa, Manila which is the main campus of the said university. The researchers limit the respondents to 100 elected Polytechnic University of the Philippines (PUP) students. Definition of Terms In order to fully understand the research, it is important to have an in-depth understanding of the terms being used by the researchers.These are the following: Commitment is remaining steadfast and true to your principles and goals, no matter how much dust is kicked up on the path ahead. It means reminding yourself of the obligations you have – not solely to other people but to yourself – and honoring those obligations (Raman, 2007). Education is an act or process of imparting or acquiring general knowledge, evolving the powers of reasoning and Judgment, and generally of preparing oneself or others intellectually for mature life Jackson, 2008). Gainful employment is a general term referring to a Job, especially a Job that a student takes after graduation (Local, 2011).Institutions are the kinds of structures that matter most in the social realm: they make up the stuff of social life (Hodgkin, 2006). Kno wledge is to represent reality in thought or experience the way it really is on the basis of adequate grounds (Moreland, 2008). Non – Sectarian means not restricted to one sector school or party (Russell, 2012). Polytechnic University of the Philippines (PUP) is a government educational institution by Republic Act Number 8292 known as the Higher Education Modernization Act of 1997, and its Implementing Rules and Regulations contained in the Commission on Higher Education Memorandum Circular No. , series 1997 (Polytechnic University of the Philippines, 2010). Quality is a measure of excellence; quality defines desirable characteristics of a product, a process, or a service (Hatfield, 2012). Selection is an act or instance of selecting or the state of being selected; choice (Yoder, 2011). Social Competence is the ability to get along well with oneself and with his environment (Adler, 2012). CHAPTER II REVIEW OF RELATED LITERATURE Program selection is the process of decision-mak ing.A great number of studies, researches, and write-ups has been conducted for a period of time and still emerged as one of the top-priority researches due to rapid changing and need of time. This chapter is the presentation of literature and studies from foreign to local which may directly or indirectly bearing to study at hand. Relevance to present studies will give a big picture why these literature and studies from foreign to local re used. Local Literature According to Syrians and Roses (1989), career planning is life goal-setting. Without such a plan, it is like making a Journey to an unfamiliar destination without a map.He proposed a Career Planning Guide that will help the students in choosing their appropriate program from planning a career, steps in planning career, goal- setting and self-understanding. Also, it reveals that guidance and counseling is intervention of underemployment individuals and career preparedness must be initiated. Foreign Literature According to Goo finess's Developmental Theory of Occupational Aspirations, it ascribes how people become attracted to certain occupations. Self-concept in career development is the key factor to career selection and people want Jobs that are compatible with their self-image.The key determinants of self-concept are one's social class, level of intelligence, and experiences. Roe's need approach emphasized that early childhood experiences play an important role in finding satisfaction in one's chosen field. The need structure of the individual, according to Roe, would be greatly influenced by early childhood frustrations and satisfactions. According to John Holland (2004), persons are paying attention to a given career by their particular personalities and various variables that represent their backgrounds.First of all, career choice is an expression of, or an extension of personality into the world of work followed by succeeding classification with particular working stereotypes. In view of that, one selects a program to satisfy preferred modal personal orientation. Modal personal orientation is a developmental process established through heredity and the individual's life history of reacting to environmental demands. If the individual has developed a strong dominant orientation, satisfaction is probable in a corresponding occupational environment.If, however the orientation is one of indecision, the livelihood of satisfaction diminishes. Local Studies According to the study conducted by Assign (1994), it was found out that the students' self-concept showed no significant influence on their career preferences. The academic achievements of students proved to be significant related to their program selection. The school were students came from had no influence on their choice of program. He recommends that a more improved and functional guidance revived in school to help students make sound career choices.The guidance services in school must be collaborative efforts of the admini strator, guidance counselors, and teachers. Classroom teachers are encouraged to do their best in improving teaching learning processes, considering that academic achievement of student influences their career preferences. Another study conducted by Lamellar (2003), it was found out that a large image off big family with low educational achievement and insufficient savings was the only basis of choosing a program, which was psychologically motivated. The exponent's level of preferred intelligence did not match to their chosen program.This could be drawn from the required level of the course in contrast with their level of preferred intelligence. The necessity of developing a career development program was need in order to prevent any misfits and to assist students in the process of crystallizing their career in life. She recommended that this program be effectively implemented. Foreign Studies According to the study conducted by Garage (2007), it was found out that by increasing car eer development activities, which includes setting career goals, students had a higher self-esteem.Maybe even more important, however, is that students were more satisfied about the education they were receiving. This will, in turn, hopefully lead to students having a deeper desire and commitment to succeed in their education. Another outcome of a higher self-esteem is that those students chose more difficult goals than students with low self-esteems. She noted that excellent detailed plan for teaching parents and teachers how to teach young students to set career goals.The plan requires a total community effort through educators, parents, and businesses. Students must be given an opportunity to identify and explore their desired careers. They can accomplish this through the â€Å"School to Work Transition† or â€Å"Job Shadowing Program. † Through the cooperative efforts of the entire community, students can identify career choices, set career goals, and have higher s elf-esteems at an early age. Ultimately, they will further their education and have a better chance of succeeding in the â€Å"do or die† world in which we live.CHAPTER Ill Research Methodology This chapter presents in detail the research method and design used, the sampling scheme, the description of the respondents, the survey instrument used for gathering the data, and the statistical treatment of the data. Research Method The major goal of the study was to find out the factors affecting program selection of the Polytechnic University of the Philippines (PUP) students. The researchers used the descriptive method which is a statistical procedure concerned with describing the characteristics and properties of persons, places or things.It is also based on easily verifiable facts. The descriptive method, describes data and characteristics about the population or phenomenon being studied. It is used for frequencies, averages and other statistical calculations. Research Design T he research plan of the study conducted a survey to Polytechnic University of the Philippines (PUP) students in the form of descriptive method wherein the researchers evaluated the factors affecting program selection of the Polytechnic University of the Philippines (PUP) students.The study made use of personal data sheet and survey questionnaire which is planned to gather quantitative and qualitative information. In which the researchers was able to assess the results that served as the foundation in the making of the conclusion and recommendations of the research. Population Frame and Sampling Scheme The research is focused only on Polytechnic University of the Philippines (PUP) dents; the researchers used selective sampling with the use of target population.The sampling scheme was conducted on Polytechnic University of the Philippines (PUP) to go well with the purpose of the study which is to find out the factors affecting program selection of the Polytechnic University of the Phi lippines (PUP) students. Description of Respondents A total of 100 students of Polytechnic University of the Philippines were used as the subject of this study. The respondents' ages ranged from 16 years old and above. Survey Instrument The personal data sheet was used as one of the survey instrument to get the exponents' profile, especially age, gender, socio economic status and programs they were in.The survey questionnaire was used as the instrument in gathering the data. There were only one (1) item; the question corresponds to factors affecting program selection of the Polytechnic University of the Philippines (PUP) students in the form of multiple choice questions. Data Gathering Method(s) and Procedures The researchers requested from the adviser to assist in the validation, finalization, and approval of the instrument. The researchers administered the survey in the form of questionnaires to the Polytechnic University of the Philippines (PUP) students.The survey results were s ubjected to data analysis and from the findings, conclusions and recommendations were drawn. Statistical Analysis of Data The researchers used the percentage method and mean value for the analysis of data. The percentage method was used to express how large or small one quantity is, relative to another quantity. It is defined by the formula: The mean is the sum of all of the data values divided by the number of data values. It is defined by the formula: where: I x = sum of all the sample observed n = total number of sample observedCHAPTER RESULTS AND DISCUSSION This chapter aims to present how the data are analyzed, and interpreted. The data were organized as to the condition of the study, which is to determine the factors affecting program selection of selected Polytechnic University of the Philippines (PUP) students. They were presented through graphs and tables for easier understanding. The data were taken from the personal data sheet and the survey questionnaire. Respondents' Pr ofile The following charts and tables show the profile of the respondents as to age, gender, socio-economic status and program.TABLE 1 Distribution of Respondents' as to Age Table one shows the distribution of the age of the respondents. The age of the respondents with the highest frequency is eighteen (18) years old with thirty-four (34) percent while the age with the lowest frequency is sixteen (16) years old, having a percentage of three (3). FIGURE 1 Distribution of Respondents' as to Gender Figure one shows the distribution of the respondents as to gender. Majority of the respondents are females, with sixty (60) percent while the remaining forty (40) percent are males.FIGURE 2 Distribution of Respondents' as to Socio -Economic Status Figure two shows that majority of the respondents, which is 44%, belong to average class (PH 14, 700 – PH 22, 300) of the monthly household income bracket, while 34% of the respondents were classified as lower class (PH 5,200- PH 14, 700). T here were 15% of the respondents who belong to the upper class (PH 22, 300 – Above), and 7% were from the poor (Below PH 5, 200) of the monthly household income bracket. TABLE 2 Distribution of Respondents' Based on Their Program Table three shows the programs of the respondents.The program with the highest weight value is ‘Bachelor in Communication Research' with a mean of 0. 8. Eleven (11) programs tied for the last rank, with 0. 01 mean rating. Respondents' Factors on Program Selection This part discussed the different factors affecting program selection of the respondents. The researchers based the choices on other researches. The researchers provided 24 factors. The respondents were asked to choose five factors. TABLE 3 Distribution of Respondents' on the Factors Affecting Program Selection Table two shows the factors affecting program selection of the respondents.The factor ‘Based on my passion' got the highest weight value with a mean rating of 0. 27, Acade mic achievements' ranked second with a mean rating of 0. 23, ‘My Ideals' on the third with 0. 18 mean rating, and, ‘Compensates high income' and â€Å"Level of intelligence' tied at the rank 4. 5, with a mean rating of 0. 16. Relationship between the Respondents' Profile and Program Selection This part show the relationship of the respondents' profile and program selection by analyzing the data connected to every variable.Syntheses were used in order to support the explanation of the researchers. Based on the data gathered, majority of the respondents are on the 18 year old age bracket. According to Wilkinson (2010), the start of being matured is when a person reached eighteen years old. As a matured student, they are likely to have more confidence in themselves, as they've been around longer and seen more things, which can give them greater understanding of the program your about to select. Based on the data gathered, majority of the respondents are females.According t o Bureau of Labor Statistics, among high school graduates, females were more likely to attend college than males. Once enrolled in college, females were less likely than males to leave college between school years. Females tend to value higher education ore highly than males do and believe it has had a more positive impact on their lives. This is because males often mature more slowly than females. According to Pillion (2006), females are more interested in learning than males because they are more motivated to improve, to achieve their goals and to perform well in whatever they do.And also, according to Mottos (2006), Females love to learn and gain knowledge because they know that being excellent academically means that they would get better Jobs for their future. Based on the data gathered, most of the respondents fall under the average class. According to Midland and Bunker (201 1), people living in average or middle class societies are more involved in school activities. They al so push to raise educational standards and put more pressure on school administrators to fire or transfer bad teachers.And some of the culture and behaviors that middle-class parents pass on to their children about education, such as valuing school achievement and attending school, are thought to come from their middle position in society with a level of income and security that makes them neither rich nor poor. All of the factors mentioned above helps boost educational achievement. Also, students in average or middle class societies tend to be healthier students academically. Based on the data gathered, majority of the respondents came from Bachelor in Communication Research. â€Å"The major is wonderful because the classes you take are so diverse.The professors in this major really care about their students and want us to succeed. The classes are the perfect size to make new friends and get to know your professors well. I would highly recommend this major† (Kari Event, 2006 ). According to Holloway (2006), Bachelor in Communication Research is the mostly picked program by the students cause it helps them to learn and develop the key skills they need to function in life instead of other programs. Communication is a fundamental needed to maintain work relationships, intimate relationships, family relationships and friendship.

Food Marketing 'ethics' play in food marketing Assignment

Food Marketing 'ethics' play in food marketing - Assignment Example There is need for socially responsible business to strike a fine balance between its profit making goals as well as the need to protect the long term interests of their consumers and the environment. The concept of ethics usually involves conflicting interests whereby people can disagree about the right course of action in a given situation. Marketers are therefore re-examining their connections with social values and responsibilities for the social and environmental impact of their actions. Corporate ethics and social responsibility have become hot topics for every business and only a few misguided companies can ignore these issues. As such, this essay seeks to critically analyse the role played by ethics in the process of marketing food. This essay is divided into three sections and the first part is concerned with outlining what is considered to be the most important ethical issues currently facing the food retail industry while the second section is concerned with describing how Tesco is tackling the issue of ethics in food marketing. The third part will look at economic and social trends within the European Union (EU) which may pose a conflict to the consumers with regards to ethics in marketing of food. Section A In recent years, it can be noted that the concept of ‘ethics’ has played an increasing role in food marketing. ... n be described as the â€Å"essential and enduring tenets† that help define the company and are â€Å"not to be compromised for financial gain or short term expediency,† (DesJardins, 2006, p.5). Values are obtained from a cultural environment which is made up of institutions and other forces that affect the society’s basic values, perceptions, preferences and behaviour these beliefs incline us to act in one way rather than the other (Kotler & Armstrong, 2004). There are many types of values which include financial, political, historical as well as religious among others. In as far as marketing of food is concerned, ethics may relate to a number of areas, for example, the healthiness of food, the effect of the food chain on the environment, and social effects of the food chain such as worker employment conditions. There are many factors as going to be outlined below that are considered to be the most important ethical issues currently facing the food retail indust ry. It is the responsibility of the organisation to ensure that the food they sale does not endanger the health of consumers or others. There is need to ensure that the organisation observes the health needs of the targeted consumers in order for it to remain viable. Whilst companies are not charity organisations, they need to safeguard the interests of the consumers with regards to their health concerns. For instance, genetically modified organisms (GMO) can be used to make food. However, these have come under criticism as a result of their side effects on the consumers’ health. This is an issue of ethical concern given that the organisation in question will need to take the health interests of the people into consideration of which failure to do that will result in negative publicity of the organisation

Communication Essay Example | Topics and Well Written Essays - 250 words - 18

Communication - Essay Example Success in collaboration is dependent on various elements such as shared goals, member interdependence, and input of all members and shared decision making (Stallworth, 1998 in Frey L., 2004). Good communication skills such as good listening skills, appreciating other team member contribution, polite interruption made collaboration in the editorial team possible and attractive cover page. To have an effective collaboration in group dynamics, various learning styles emerge such as; auditory learning, kinesthetic and visual learning and intelligence (emotional intelligence). The different learning styles and intelligence constitute an important tool in improving individual learning and collaboration. This helps group members develop social, cognitive and reasoning skills such as critical thinking and communicating ideas. Group collaboration creates a sense belonging for all stakeholders. Benchmarks are within timelines to keep every collaborative effort on track. An effective communication network must exist for collaborative

Togo Essay Example | Topics and Well Written Essays - 750 words

Togo - Essay Example The first elected president of Togo is Sylvanus Olympio on the elections of 1960 by beating Nicolas Grunitizky, the candidate supported by France. On January 13, 1963, the Olympio government is reversed by a military putsch organized by Nicolas Grunitizky and Etienne Gnassingb Eyadema then simple sergeant. After the assassination of Olympio, Grunitizky proclaims president. Its reign will be short, because in 1967 he is relieved by Gnassingb Eyadema who decided to seize power himself. His dictatorial attitude common to many African dirigants enables him to direct the country during 38 years he dies on February 5, 2005, which will enable him to dispute to Fidel Castro the title of "dictator longest in activity". The current president is the son of the former dictator Faure Gnassinbe, having taken the capacity after "elections". From an economic point of view Togo is one of the poorest countries of Africa. The situation could however have been different. The beginnings of the Eyadema reign of were lucky as well on the political than the economical point of view. It is unfortunately an economy made a long time of corruption, amateurism and improvisations. All the models were copied with more or less failure. From the "Chinese" economical plans, without any budgetary provision, to the Israeli co-operative plan, a common point characterizes all its stages: the absence of long-term prospect and ideological or theoretical bases. In 1967 the new port stimulated the economy, the extraction of phosphate had just been grinds and the modest industrialization still started by the first president seemed to succeed. The courses of the cocoa and the coffee were excellent. During 19 years Togo will know a certain stability period and even a relative prosperity because of very great phosphate resources (4th world producer, the resources are exploited by alien companies which pay a royalty to the Togolese government). However at the end of 1982, the country is in crisis and strongly involves in debt. President does not have other choices than respect the conditions of the experts of the International Monetary International Monetary Fund as well as the World Bank and France," The purse being empty". Alas as it is current in African countries, measurements are awkwardly applied with the result that the economic situation of the country is not improved on the contrary. The agricultural revolution for example starts by the president is by a failure, until our days Togo is still not self-sufficing in food goods. It is a result which however was foreseeable; it is indeed foolish to think that one can make pass directly to tractor a farmer who, all its life, ever uses hoe and machete without any preliminary formation. Hundreds of tractors were thus bought while the hangars where they would have being preserves had not been even built. The only positive point of this revolution was a considerable increase in the cotton production, from 1959 to 1989 the production increased: 2000 to 40000 tons. The industrialization or rather the attempt at industrialization of the country was quite as catastrophic. Until the phosphates boom of the country followed a careful course of industrialization which really succeeded, however later the president launched out in a series of useless and very expensive projects which